Client Testimonials

Weatherford International,

"“First, I just want to say thank you to T-REX and the crew that was sent out to do this work. The quality of your ..."

View Full Testimonial >>

Contact Us Today


Engineering-Projects.jpg

 

Subsea-In-Line-Gas-Sled.jpg

 

Big Foot TLP Deck Analysis
  • FEA modeling of mating posts for stress concentration factors for fatigue analysis
  • Evaluation of mating posts for misalignment of internal plate stiffeners and their effect on the SCF
  • Review of  upper and lower deck plate buckling design check

 

KBR-Chevron-Bigfoot.jpg

 

Walker Ridge Manifold and Suction Piles

  • Design and layout of piping 20” system, 4 hubs, 2 – 20” Y’s, and secondary pressure release piping
  • Layout manifold framing, analyzed and design frame system
  • Designed suction pile interface
  • Analyzed and designed suction pile
  • 3D Inventor models of manifold and suction pile, developed 2D AFC drawing package
  • Breakaway Joint design, patent pending
  • Jumper analyses for breakaway joint incorporation with shag load application
  • Linear and non-linear fracture analyses of breakaway joint
  • Full scale testing of breakaway joint for fatigue and bending test and half jumper test

 

Jack St. Malo Oil Export Pipeline (JSMOEP) SSIV Skid

  • Developed numerous piping and structural configurations for 20” actuated ball valve weighting 68,800 lbs.
  • Developed final skid frame with bottom and two side folding mudmats
  • Incorporated a ± 3° pipe and valve rotation about the Z vertical axis for installation alignment
  • 3D Inventor models of manifolds hose rack systems, developed 2D AFC drawing package

 

Olympus ‘Mars B’ Drilling modules

  • Provided Nabors with 3D modeling structures and drilling equipment
  • Developed pipe support details and AFC drawings for Drilling and Drilling Support Modules
  • Worked on routing of pipe system in DSM and pipe support bridge

 

Olympus ‘Mars B’ Drilling module and Drilling Support Module Load-out

  • Organized and ran load-out meeting
  • Developed load-out schedule
  • Developed Hasid matrix the following:
  •      Drill Rig Lowering by 15 feet for load-out
  •      Transportation from assembly yard to dock side
  •      Load-out operations onto barge
  •      Sea-fastening installation 
  •      Drilling Support Module transportation to dock side 
  •      Load-out operations onto barge
  •      Sea-fastening installation
  • Reviewed and made recommendations on temporary road design for load-out
  • Coordinated  work activities between Nabors, Shell, Marine Warranty Surveyor, and Mammoet
  • Reviewed Mammoet drawings, calculations and reports
  • Observed all transportation and load-out operations
  • Observed weight and CG determination of drilling module
  • Monitored temporary supports under drilling module during jack-down operations

 

MWCC Manifold support Suction Pile

  • Developed Suction Piles concepts and detail design
  • Designed SP for two water depth ranges and upper and lower bound soil strengths
  • Developed SP size for worst condition, to be cut down later
  • 3D Inventor models of manifolds hose rack systems, developed 2D AFC drawing package

 

TLPs: Auger, Mars, URSA, Ram Powell, Brutus, Nakika, Gumusut

  • Complete global analysis of integrated TLP deck structure
  • Analysis and design of stress skin modules; includes plate buckling, blast loads, fatigue and strength analysis
  • Develop AFC fabrication drawings
  • Work with fabricators during construction; includes scheduling, weld procedures, material approval and other fabrication requirements

 

Mars B TLP Quarters Module Design

  • Structural consultant for analysis of module
  • Review analysis techniques and procedures; make recommendations on methods
  • Review/consult on required specifications and drawings
  • Review/consult on AFC drawings
  • CVA on analysis and design; includes plate buckling, blast loads, fatigue and strength analysis

 

Mars A Quarters Module Modification Analysis

  • Analysis and design addition of new quarters package
  • Complete global analysis of integrated TLP deck structure
  • Develop AFC fabrication drawings

 

Auger Llano Deck Expansion Analysis

  • Complete global analysis of integrated TLP deck structure
  • Detailed design of joints
  • Fatigue design

 

Big Foot TLP Deck Analysis

  • Structural consultant for module analysis
  • Review analysis technique and procedures; make recommendations on methods
  • Review/consult on required specifications and drawings Review/consult on joint details
  • Review/consult on required fatigue analysis
  • Review/consult on AFC drawings
  • CVA on analysis and design; includes plate buckling, blast loads, fatigue and strength analysis

 

Nakika Sled Design (26)

  • Develop sled concepts and piping layouts
  • Work on field layouts and develop 3D animations
  • Complete analysis and design of all sled structures, includes installation, settlement calculations, jumper loads and thermal loads
  • Develop Bid and AFC drawings; Review bids
  • On-site Shell representative for fabrication (includes scheduling, weld procedures, material approval, production meetings, and HSE)

 

Enbridge Walker Ridge Gathering System FEED Study (14)

  • Develop in line sled concepts and piping layouts up to 20" diameter pipe
  • Work on field layouts and develop 3D animations
  • Complete analysis and design of all in line sled structures; includes installation, settlement calculations, jumper loads and thermal loads
  • Develop FEED study drawings

 

1st-PLET-Barge-1-copy.jpg

 

Perdido Sled Design (14)

  • Develop sled concepts and piping layouts
  • Work on field layouts and develop 3D animations
  • Complete analysis and design of all sled structures, includes installation, settlement calculations, jumper loads and thermal loads
  • Develop Bid and AFC drawings
  • Review bids
  • On-site Shell representative for fabrication (includes scheduling, weld procedures, material approval, production meetings, and HSE)

 

Perdido Connection Foundation Design

  • Develop connection foundation concepts and piping layouts
  • Develop 3D animations
  • Complete analysis and design of the connection foundation structure; includes installation, settlement calculations, jumper loads and thermal loads
  • Develop Bid and AFC drawings
  • Shell representative for fabrication (includes weld procedures, material approval)

 Perdido_Connection_Foundation.png

Princess Gas Lift PLET Design

  • Develop PLET concepts and piping layouts
  • Develop 3D animations
  • Complete analysis and design of PLET structure; includes installation, settlement calculations, jumper loads and thermal loads
  • Develop Bid and AFC drawings

 Shell_Princess_UPWF_Gas_Lift_PLET.png

Princess Manifold Design

  • Develop manifold concepts and piping layouts
  • Develop 3D animations
  • Complete analysis and design of manifold structure; includes installation, settlement calculations, jumper loads and thermal loads
  • Develop Bid and AFC drawings
  • Develop Llano manifold design

OTHER PROJECT EXPERIENCE

  • Crosby Pastel Pink (PLETs)
    • Develop PLET concepts and piping layouts
    • Work on field layouts and develop 3D animations
    • Complete analysis and design of all PLET structures;including installation, settlement calculations, jumper loads and thermal loads
    • Develop Bid and AFC drawings
    • Review bids
    • Fabrication (includes scheduling, weld procedures, material approval, production meetings, and HSE)

 

  • Coeflex-Stena (Recovery tool)
    • Fabricate structures and machine ROV actuated capture mechanism
    • Coat and test equipment

 

  • Atlantis (PLETs, Jumpers with hot water remediation, SCR Tension Clamps, ROV panels)
    • Develop structural concepts and piping layouts
    • Work on field layouts and develop 3D animations
    • Complete analysis and design of all structures; includes installation, settlement calculations, jumper loads and thermal loads
    • AFC drawings
    • On-site BP representative for fabrication (includes scheduling, weld procedures, material approval, production meetings, and HSE)
    • Design-build project; responsible from concept to delivery

 

  • Manatee (PLETs)
    • Develop PLETs concepts and piping layouts
    • Complete analysis and design of all PLET structures; includes installation, settlement calculations, jumper loads and thermal loads
    • Develop Bid and AFC drawings
    • Review bids
    • Shell representative for fabrication (includes scheduling, weld procedures, material approval, production meetings, and HSE)

 

  • Tahiti (Amberjack Midline Sleds)
    • Develop in line sled concepts and piping layouts
    • Work on field layouts and develop 3D animations
    • Complete analysis and design of in line structure; includes installation, settlement calculations, jumper loads and thermal loads
    • Develop Bid and AFC drawings
    • Review bids
    • Fabrication (includes scheduling, weld procedures, material approval, production meetings, and HSE)

 

  • Mensa (Jumper truss)
    • Develop Jumper truss concepts and piping layouts
    • Work on field layouts and develop 3D animations
    • Complete analysis and design of all Jumper truss structures; includes installation, settlement calculations, jumper loads and thermal loads
    • Develop Bid and AFC drawings
    • Review bids
    • Fabrication (includes scheduling, weld procedures, material approval, production meetings, and HSE)

 

  • Pluto (flowlines)
    • Develop sled concepts and piping layouts 

 

  • Glider (PLETs)
    • Develop PLET concepts and piping layouts
    • Work on field layouts and develop 3D animations
    • Complete analysis and design of all PLET structures; includes installation, settlement calculations, jumper loads and thermal loads
    • Develop Bid and AFC drawings
    • Review bids
    • Shell representative for fabrication (includes scheduling, weld procedures, material approval, production meetings, and HSE) 

 

  • Atlantis SIT
    • Complete field set-up:  2 manifolds, 3 PLETs and 2 trees along with 9 jumpers
    • Develop test procedures, design and fabrication of the support stands, monitoring systems and field layout

 

  • Tahiti SIT
    • Fabricate, test and coat jumpers

 

  • Llano Manifolds
    • Develop manifold concepts and piping layouts
    • Develop 3D animations
    • Complete analysis and design of manifold structure; includes installation, settlement calculations, jumper loads and thermal loads
    • Develop Bid and AFC drawings
    • Shell representative for fabrication (includes weld procedures and material approval)

 

  • Gumusut PLETs
    • Develop PLET concepts and piping layouts
    • Complete analysis and design review of all PLET structures; includes installation, settlement calculations, jumper loads and thermal loads
    • Design review of seismic (earthquake) analysis

 

  • Discovery
  • Amberjack Midline (Sled)
  • Marathon Arnold (Manifolds)
  • Aspen (Riser Clamps)
  • Jamnagar (Riser Platform, Boat landing + Riser Guard)
  • Llano (PLETs)
  • Okeanos Midline PLET (Jumper Transport Stands Spreader bars and Lifting Rigging; PLET SIT, PLET FAT
  • Nakika PLETs
  • Einset PLETs
  • Princess PLETs
  • Ursa Princess PLETs
  • Mensa PLET
  • Princess Jumper Truss
  • Habanaro
  • Magnolia Midline Sled
  • Thunder Horse Spool Frames
  • Demios PLETs
  • Princess Manifolds
  • Perdido PLETs
  • Perdido Midline Sled
  • Perdido Manifolds (Flowline Pile Supports, Control Pods)
  • Mars Lofs Control Pods
  • Bonga Valve Pods
  • Bonga PLETs
  • BC-10 PLETs